Meta M357T Replacement

Product Information

Exclusive to Abacus Car Alarms Meta M357TV2 plug & play replacement alarm unit for the earlier M357 & M357T & the Gemel E587 alarms & Abletronics Absolute Protec alarms (for the M351a - click here). Replaces faulty alarms or alarms which do not have the codecard. This unit comes with a custom made plug & play adapter loom, in most cases the replacement will be up and working within minutes. Simply remove the cable covers from the old alarm & swap over the plug into the replacement adapter socket, job done. Complete with easy to follow instructions, fitting kit & new certificate.

Also replaces the M357T or the Gemel E587 fitted to the KTM950/690 Supermoto & Super Duke 990, can also be fitted as a new alarm to these bikes - contact the office for more information.

The ultimate motorcycle alarm/immobiliser. Updated version of the award winning M357T. The V2 comes with the optional extra of a key conversion for a neat solution to eliminate additional remote controls. Features: Anti scan, anti grab rolling code operation Resin bonded construction Integral Microchip movement sensor Water and vibration resistant Failsafe twin circuit immobilisation Sleep mode (zero battery drain) Audible and visual arming signals Passive arming - auto re-arm Secure override facility Low battery warning Ignition key conversion Diagnostic LED Accessory protection feature Hotwire sensing Covert black wiring Battery backup siren

Specifications:

• Anti scan, anti grab rolling code operation
• Resin bonded construction
• Integral Microchip movement sensor
• Water and vibration resistant
• Failsafe twin circuit immobilisation
• Sleep mode (zero battery drain)
• Audible and visual arming signals
• Passive arming - auto re-arm
• Secure override facility
• Low battery warning
• Ignition key conversion
• Diagnostic LED
• Accessory protection feature
• Hotwire sensing
• Covert black wiring
• Battery backup siren
• Maximum Dimensions 12.5 X 6.5 X 4.75cm (LWH - plug not fitted)
• Thatcham Approval No: TMC1-118/1102  
• Supplied with a blank Thatcham certificate

Click here for Ride Magazine test Report

FAQ

Question	Answer
I have a m357th will this unit replace this easily and do i have to be an electrician to fit it, as it looks like there is a few other wires to connect other than the plug.	Simply remove the plug from the old alarm & insert into the socket of the new adapter loom supplied with the M357TV2, assuming the old alarm was functioning at one stage or another & the wiring has not been messed around with the new alarm will function immediately. No electrical knowledge required, supplied with simple to follow instructions.
How long is the adapter wire as I would like to move the alarm to the other side of the bike?	The looms are about 10 inches (24cm) from end to end, however we can also supply longer version enabling the alarm to be moved to another area of the bike, please leave a note on the checkout page if upgrading to the longer adapter loom. The longer looms are about 14", if longer lengths are required please contact the office

Price: £175.00 £155.00

• Tell a Friend
• Back To Catagory

• Ask a Question