Meta M357T Replacement

Product Information

Exclusive to Abacus Car Alarms Meta M357TV2 plug & play replacement alarm unit for the earlier M357 & M357T & the Gemel E587 alarms & Abletronics Absolute Protec alarms (for the M351a - click here). Replaces faulty alarms or alarms which do not have the codecard. This unit comes with a custom made plug & play adapter loom, in most cases the replacement will be up and working within minutes. Simply remove the cable covers from the old alarm & swap over the plug into the replacement adapter socket, job done. Complete with easy to follow instructions, fitting kit & new certificate.

Also replaces the M357T or the Gemel E587 fitted to the KTM950/690 Supermoto & Super Duke 990, can also be fitted as a new alarm to these bikes - contact the office for more information.

The ultimate motorcycle alarm/immobiliser. Updated version of the award winning M357T. The V2 comes with the optional extra of a key conversion for a neat solution to eliminate additional remote controls. Features: Anti scan, anti grab rolling code operation Resin bonded construction Integral Microchip movement sensor Water and vibration resistant Failsafe twin circuit immobilisation Sleep mode (zero battery drain) Audible and visual arming signals Passive arming - auto re-arm Secure override facility Low battery warning Ignition key conversion Diagnostic LED Accessory protection feature Hotwire sensing Covert black wiring Battery backup siren

This alarm is also a direct plug & play fitment for the following Moto Guzzi motorcycles; Breva 750, Breva 850 / Breva 1.100, Griso 850 / Griso 1100, Norge 1200 Bellagio, 1200 Sport & Stelvio. Before ordering for these bikes please make sure you know where the location of the 18 way plug is (see photo below)

Specifications:

• Anti scan, anti grab rolling code operation
• Resin bonded construction
• Integral Microchip movement sensor
• Water and vibration resistant
• Failsafe twin circuit immobilisation
• Sleep mode (zero battery drain)
• Audible and visual arming signals
• Passive arming - auto re-arm
• Secure override facility
• Low battery warning
• Ignition key conversion
• Diagnostic LED
• Accessory protection feature
• Hotwire sensing
• Covert black wiring
• Battery backup siren
• Maximum Dimensions 12.5 X 6.5 X 4.75cm (LWH - plug not fitted)
• Thatcham Approval No: TMC1-118/1102  
• Supplied with a blank Thatcham certificate

Kit supplied includes M357TV2, M357TV2 to M357(T) adapter loom, two fobs (one M252 key type fob & key fitting kit & one M2000 fob) cable securty cover, spare LED & fuse, cable ties  insulating tape & easy to follow fitting instructions 

Click here for Ride Magazine test Report

FAQ

Question	Answer
I have a m357th will this unit replace this easily and do i have to be an electrician to fit it, as it looks like there is a few other wires to connect other than the plug.	Simply remove the plug from the old alarm & insert into the socket of the new adapter loom supplied with the M357TV2, assuming the old alarm was functioning at one stage or another & the wiring has not been messed around with the new alarm will function immediately. No electrical knowledge required, supplied with simple to follow instructions.
How long is the adapter wire as I would like to move the alarm to the other side of the bike?	The looms are about 10 inches (24cm) from end to end, however we can also supply longer version enabling the alarm to be moved to another area of the bike, please leave a note on the checkout page if upgrading to the longer adapter loom. The longer looms are about 14", if longer lengths are required please contact the office

Price: £175.00 £155.00

• Tell a Friend
• Back To Catagory

• Ask a Question