Change Currency: GBP

Maserati 2 Button Circuit Board

£75.00

Manufacturer: Meta

Stock Level: 1

Product Information

Two button circuit board for the Maserati 4200 series inclusive of programming. Please note as well as the 16 digit code a working fob is also required to program this new fob into the alarm control unit. If the code is not available the alarm ECU can be re-programmed with a new code and replacement fobs - more info. If in any doubt please contact the office. For more information about all Meta remote fobs click here 

Maserati 2 button fob
The 16 digit code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect (known as a hexadecimal number). The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.

Click For Programming Instructions

Please add the 16 digit code number to the comments box at checkout. Complete with programming instructions

  We are unable to supply the fob case

 

Very Limited Stock - When they are gone they are gone

 

FAQ
 Question Answer

Hi I bought a 3200 and its missing the red key- it has a generic non Maserati looking key? Can you help program an original key if I buy one?

We can only help with the Meta alarm fitted to the car, for the keys you need to see a Maserati dealer/specialist
   
   

 

 

 

Product Code: AAS0179

 

© Copyright Abacus Car Alarms 2018

eCommerce by CubeCart