M99T2 To HPA For TVR with Remote Boot Release
Plug & play replacement alarm kit for the TVR range of vehicles fitted with the M99T2, complete with a remote boot release option, for vehicles fitted with the electric boot release button. Open the boot without having to get into the car switch on the ignition & press the release button to open the boot, this all can be done with a single press of the remote fob, simple one wire connection to the boot release button fitted to the vehicle.
Simple plug & play swap over of the M99T2 alarm with the replacement HPA unit & plug & play swap over of the M36T2 immobiliser. This kit consists of the HPAT alarm ECU & M36T2 immobiliser both fitted with suitable connections for an easy plug & play swap over. This kit is not supplied with a siren as standard (option - choose below) & will function with the original item, if the siren is faulty add the siren in the option list below.
All replacement TVR adapted M36T2 immobilisers will now be sent out with the immobiliser circuits switched to match the TVR wiring, this will now match the higher rated relay to the starter circuit of the TVR, this should cut down on the hot start issue, more info
This is the replacement kit for the M99T2 & M36T2 systems only, for the M99T system click here
Add Key blade into M252 fob for TVR vehicles, choose in the options box below
If two key blades are chosen the above kit will be supplied with two M252 keyfobs (instead of 1 M252 & 1 HPA fob), each M252 will be fitted with a YM27 key blank ready for any good autolocksmith to cut.