Meta M20/1 Kit
Replacement remote central locking kit for the Meta M20/1. Simple plug & play kit to convert Fiat first model series including the Punto Mk1, Fiat Bravo/Brava, Barchetta, Palio, Seicento & Multipla to give remote locking for these models. This kit will not function with later models unless the yellow central locking relay shown in the photo is fitted to the vehicle. This kit will work with all cars fitted with the above 6 pin relay. Locking & unlocking the doors using the door key still functions as normal.
The M20 range of remote locking kits are no longer available, however we have modified the standard Fiat M20/1 CDL relay using the Meta HPA alarm module to give a remote locking facility. Simply locate & remove the relay from the Fiat vehicle, plug in the replacement relay, connect the extension cable connector to the HPA unit & away you go, no other wiring to do. This kit is supplied with an easy fit LED which can be stuck to the windscreen or dash, this will give a visual indication which may also deter thieves, if a visual deterrent is not required the LED can be fitted with the alarm under the dash (LED must be connected as it also acts as the antenna).
There is also an option to upgrade to a basic alarm system, the alarm kit will also be supplied with a siren & interior sensors, simply mount the sensors to each window pillar & secure the siren somewhere under the bonnet or for a simpler option fit the siren inside the car (under the dash for example) so the intruder will get an earful when the alarm sounds, choose the alarm option in the drop down box below. The installation for both kits requires no extra wiring apart from stated above, all connections simply plug in.
Boot release option:
If this option is chosen one button of the fob will operate the doors the other button will open the boot. Please note for the release option to function the boot on the vehicle must be opened by an electrical button, not a lever. If the vehicle's boot opens manually or by a mechanical lever an solenoid will need to be added, see here. This kit does not come with the solenoid which if required will need to be ordered separately. Choose the boot release option below.
These kits are supplied on an exchange basis for the original yellow CDL relay, as such there is a £25 surcharge which will be refunded when the old relay is returned, the relay must be in good working order. The base kit comes with two fobs & code card, HPA module, Fiat CDL relay & LED, the alarm kit adds siren & interior sensors, the boot release kit comes with a pre-wired relay which gives a 1 second pulse when the larger button on the fob is pressed (not supplied with the solenoid which can be found here ). All kits come with a one year no quibble warranty.
This kit will also fit other vehicles fitted with exactly the same locking relay, compare the CDL relay shown on this page with the relay fitted to your vehicle, (It must have exactly the same pin layout & markings for the pins)
Send Back the old Yellow CDL Relay for a £25 Refund
(The returned relay must be in a fully functioning condition to qualify for the refund)