Lotus Key Fob
Complete replacement original Lotus M300 case with rubber button & YM28 key blank. This fob will operate with all Lotus vehicles fitted with the Meta System alarm system. This sale is for one fob complete with coded circuit board & a blank uncut key element. The empty case version is available here. Very limited stock, when they are gone they are gone
Information about 16 digit coded fobs
Please note a working fob is required to code this new fob into the alarm control unit. For the M357 range of motorcycle alarms the override code (company code) is required. For more information about all Meta remote fobs click here, if the code is not available please contact the office as the alarm ECU could be re-programmed with a new code and replacement fobs (later models only) - more info. If in any doubt please contact the office.
Meta Code Card showing alarm code & positions
The 16 digit code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect (known as a hexadecimal number). The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.
Click Here For Programming Instructions
Complete with programming instructions
Please add the 16 digit code to the comments box on the checkout page.