Welcome Guest [Login | Register]
Location: /Alarm Fobs

Meta M252

Meta M252

Product Information

Key remote control for all Meta 16 digit controled remote systems. Key remotes supplied by companies such a Renault can cost £180 and over £150 from VW/Audi. For a relatively small amount add remote control built into your key on any of the Meta 16 digit encrypted remote controled alarm/central locking systems. Simply add your own key element which can be removed from the old keyfob or made up by a locksmith (key fitting kit required). A dedicated space is provided for most imobiliser chips. A sixteen digit hexadecimal code is required to program into your existing system. This code is found on the red code card supplied with the alarm. Click Here For More Info. Choose the key fitting kit below in the options box. This fob will work with all Meta 16 digit coded alarm systems, the yellow button may have no function on alarms that do not support the panic function.

Meta code card showing 16 digit code
The code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect. e.g. 45F35BA4490A14E7 is a correct code. The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.

Complete with instructions of how to program into your vehicle's alarm (a working fob is required - more info)

Key element not supplied, many locksmith's can supply copies

M252 fitted with key element



Please Note this fob is designed to work with UK/Ireland supplied  Meta Alarm systems which use the 433Mhz frequency for communication between fobs and alarm systems, as such may not work with equivalent devices supplied to other parts of the World, we offer no guarantee that they will work with these products. This remote fob will not work with Meta devices supplied to either Belgium or Holland unless the alarm frequency is 433Mhz. We offer no refund should the remote fobs not function correctly with non UK/Ireland supplied alarm systems you buy at your own risk. If you are unsure about the frequency of your alarm system locate the alarm control unit (usually hidden somewhere under the dash) where on most boxes will be a sticker with the frequency printed

We can now supply Fobs for Holland, Belguim & other countries that use the 315Mhz frequency - More Info


For car & early bike alarms a working fob is required to program a new remote into the alarm brain, later bike alarms (357 range) a five digit override code number is required - without either it will not be possiblie to code in a new remote fob.


  Question  Answer
 I do not have the 16 digit code number if I send you my old fob can you make a copy?  Sorry this cannot be done, we can only re-code the complete alarm ECU, see here for more info (motorcycle alarm ECU's cannot be re-coded)
The switch on my fob has broken off the circuit board, can you repair it?   Sorry we do not have the parts or the skills to micro solder on a replacement switch  
My vehicle has a chipped key immobiliser system fitted, can this work the vehicles standard immobiliser.   This fob has a space specially designed for OE transponder chips. If possible remove the transonder chip from your key and place inside the Meta fob, this will then work as if it was a factory fitted device. If the original chip cannot be removed from your key contact your local auto locksmith many of whom are able to clone the factory chip and fit inside this fob.  
Can you give me a price, for the outer shell, i dont need the inners, just the plastic surround  The outer case is available here

 The large rubber button has perished, do you supply this seperately

I have lost the side button can you help

The buttons are not available seperately, but the rubber button from the M2500 case is the same, this is a much cheaper way to purchase the button, more info 

The side button can now be purchased seperately, More Info


For the Meta M357TV2-1 (Not M357TV2) please contact the office before purchasing 

Add key fitting kit - choose below in the product options box


Add key fitting kit - choose below in options box

 Key element not supplied, many locksmith's can supply copies

Please enter the 16 digit code in the comments section on the checkout page

Price: 50.00

  • Add Product Review

  • Product Options:
    Add Key Fitting Kit

    Product Code: ABS0236
    In Stock: 9  
    Quantity: Add to Basket

    Related Products

    Meta M2502
    Meta M2502
    Meta M2002
    Meta M2002
    Meta M300 Fob
    Meta M300 Fob
    55.00 50.00

    Shopping Basket
    Your basket is empty.
    0:
    Search for:
    Sale Items
    1. TVR Original M99t M36 Kit
      Save 75.00
    2. Meta M99T2 (NEW)
      Save 51.00
    3. Excalibur K9 Classic
      Save 30.00
    4. Autowatch 457RLi
      Save 26.00
    5. Eldes EPIR2
      Save 25.00
    6. Meta M05 Siren
      Save 24.00
    7. Meta M871a
      Save 24.00
    8. Datatool Snitcher
      Save 24.00
      Save 15.01
    10. Single Zone Microwave
      Save 15.00
    Products: 364
    Categories: 49
    Prices: British Pounds
    Mailing List
    Subscribe to our mailing list below:
    Special Offers
    Meta Easy Fit Parking Sensors, Mounts Behind Number Plate Lowest Ever Web Price
    More Info
    Order Tracking
    Payment Methods
    Powered by CubeCart
    Copyright Devellion Limited 2006. All rights reserved.