Change Currency: USDJPYGBPCADEURAUD

Meta M300 Rubber Buttoned Empty Case

£150.00

Manufacturer: Meta

Stock Level: 1

Product Information

Meta M300 single button ignition key type remote fob with rubber button, supplied as standard with most Lotus cars & early Meta Motorcycle alarms. The rubber buttoned version is very rare, one only, when it's gone it's gone. Can be bought as an empty case, choose above. Key element shown in photo is not supplied

 

This fob needs to be coded with the 16 digit code, please enter the code number in the comments section on the checkout page. Meta no longer manufacture this fob so it is in limited supply.

 

Information about 16 digit coded fobs -Please note a working fob is required to code this new fob into the alarm control unit. For the M357 range of motorcycle alarms the override code (company code) is required. For more information about all Meta remote fobs click here, if the code is not available please contact the office as the alarm ECU could be re-programmed with a new code and replacement fobs (later models only) - more info.If in any doubt please contact the office. 


Meta Code Card showing alarm code & positions

The 16 digit code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect (known as a hexadecimal number). The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.

Click Here For Programming Instructions

Product Code: M300 Rubber Case

 

 

 

 

©2022 abacuscaralarms.co.uk - All rights reserved.

eCommerce by CubeCart