Change Currency: GBP

Datatool S3 Replacement (3.1b)

£155.00

Manufacturer: Meta

Stock Level: 2

Product Information

Plug & play replacement for the Datatool S3 & Veto Plus alarm systems. Simply locate the alarm unit mounted to the bike & remove the cover (Torx T10 security screw driver required) Unplug the two connectors & insert into the plugs fitted to the DefcomT adapter loom. A junior hacksaw or sharp knive will also be required to cut away some of the plastic molding from the alarm case of the S3, see the fitting instructions. Click here to see the fitting instructions (This is for the M357 fitting for the DefcomT will be very similar)

Please note the Defcomt3.1b is not Thatcham 1 approved, this replacment kit is specified as a standard battery backed up alarm system which can function in the similar manor to the original S3,  (Auto alarm arming is turned off optional - choose above, auto immobilisation is standard)

 

ID Tag Option:

If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.

B9.5 Bluetooth ID Tag Fob

The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incurred. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code

 

Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area

 

Upgrade To TXM252 key Type Fob (Key element not included

Meta M252 fitted with key element (Not Supplied)

Optional upgrade to the M252 type fob, complete with key fitting kit (not supplied with a key element)

The key fitting kit will allow almost any key to be fitted to the fob, modifiactions to the key will include removal of any plastic, filing & drilling, for more details click the link below

 

Features:

  • Two anti-scan / antigrab, self coding HPA EVO transmitters
  • Passive arming single circuit immobiliser (Programmed as standard)
  • Passive arming for full alarm system (Optional - choose above)
  • Hazard flash
  • Battery Backed Up Siren 
  • Visual and audible arming signals (selectable)
  • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
  • Diagnostic LED
  • Internal Movement sensor (can be excluded)
  • Loud 114db remote siren
  • Sleep mode with zero battery drain after 20 days
  • Low 1.8 mA current consumption
  • Low bike battery warning when disarming
  • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
  • System test facilities in first 25 seconds of arming informs of any faults
  • Panic facility
  • Movement sensor deletion facility
  • Two additional protection circuits (Loop break & switched neg trigger circuits ) 
  • Alarm automatically re-arms if triggered
  • Upgrade to ID Tag Remote (B9.5)
  • Upgrade to key remote (EVO M252)
  • Operating temperature -25C to 85C
  • Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
  • Magnetic seat sensor  (Must be fitted for Thatcham 2-1 approval)
  • Thatcham Approval Number TMCU-236/0106 (for use as an 2-1 upgrade alarm) 
  • Approved by KTM
  • Also Approved by Yamaha UK
  • Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required)
  • Full fitting instructions which includes a step by step installation guide
  • Wiring info for the bike (if available, enter info in comments section on the checkout page)
  • Three year no quibble warranty UK only (1 Year if supplied to outside the UK) 
  • Telephone & Email technical support

 

The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incurred. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code

Product Code: DefcomT S3 3.1b

 

© Copyright Abacus Car Alarms 2021

eCommerce by CubeCart