Change Currency: GBP

Honda Plug & Play Alarm Kit (3.1b)

£150.00

Manufacturer: Meta

Stock Level: 3

Product Information

Simple Plug & Play alarm for later Honda motorcycles,  fitting can be done within minutes. Special version of the Meta Defcom3.1b Thatcham 2-1 approved motorcycle alarm system supplied with a plug and play wiring loom for a number of late model Honda motorcycles. In most cases this alarm can be fitted in minutes using the supplied plug & play wiring loom. This kit will upgrade most Honda bikes fitted with the HISS system to Thatcham Category 1 status, (the bikes must be fitted with the multiway plug - see photo). Supplied with a plug & play LED. The alarm has the option of an extra imobiliser circuit (not required on HISS system bikes) also an extra trigger input for seat or pannier protection etc.

 

ID Tag Option:

 

If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.

B9.5 Bluetooth ID Tag Fob

The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incurred. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code

Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area

 

 

 

Features:

  • Two anti-scan / antigrab, self coding HPA EVO transmitters
  • Passive arming single circuit immobiliser (Programmed as standard)
  • Passive arming for full alarm system (Optional - choose above)
  • Hazard flash
  • Battery Backed Up Siren 
  • Visual and audible arming signals (selectable)
  • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
  • Diagnostic LED
  • Internal Movement sensor (can be excluded)
  • Loud 114db remote siren
  • Sleep mode with zero battery drain after 10 days (Can be extended  - please ask before ordering)
  • Low 1.8 mA current consumption
  • Low bike battery warning when disarming
  • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
  • System test facilities in first 25 seconds of arming informs of any faults
  • Panic facility
  • Movement sensor deletion facility
  • Two additional protection circuits (Loop break & switched neg trigger circuits ) 
  • Alarm automatically re-arms if triggered
  • Upgrade to ID Tag Remote (B9.5)
  • Upgrade to key remote (EVO M252)
  • Operating temperature -25C to 85C
  • Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
  • Magnetic seat sensor  (Must be fitted for Thatcham 2-1 approval)
  • Thatcham Approval Number TMCU-236/0106 (for use as an 2-1 upgrade alarm) 
  • Approved by KTM
  • Also Approved by Yamaha UK
  • Supplied with blank Thatcham approved certificate (UK only)
  • Full fitting instructions which includes a step by step installation guide
  • Wiring info for the bike (if available, enter info in comments section on the checkout page)
  • Three year no quibble warranty UK only (1 Year if supplied to outside the UK) 
  • Telephone & Email technical support

 

The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incurred. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code

All Meta Thatcham Approved bike alarms supplied by Abacus Car Alarms come with full fitting instructions which includes a step by step installation guide, wiring info for the bike (if available), a blank Thatcham certificate, three year no quibble warranty (UK Only- 1Year outside the UK) & telephone & Email technical support.

Product Code: Honda 3.1b

 

© Copyright Abacus Car Alarms 2021

eCommerce by CubeCart