Change Currency: GBP

TVR M99T2 To HPA NO Boot Release

£300.00

Manufacturer: Meta

Stock Level: 6

Product Information

Simple plug & play swap over of the M99T2 alarm & M36T2 immobiliser with the replacement HPA/M36T2 for all TVR cars fitted with the M99T2/M36T2 alarm system (Not M99T), these alarms were fitted from 2000 to around 2004 to all TVR's, please check your vehicle before ordering. This kit consists of the HPAT alarm ECU & M36T2 immobiliser both fitted with suitable connections for an easy plug & play swap over. Siren not supplied, this kit will function with existing siren, add siren if the original is not functioning or a spare is required. This kit will be supplied with two RK36s touchkeys & two HPA two button fobs (shown in the main photo), if the key option is chosen the fob(s) will be upgraded to the TVR style M300 type, the M300 remotes without the keys can also be chosen. Other Meta fobs can also be supplied with this alarm, contact the office for more info, click here for more fobs

The HPA only disarms the M36 immobiliser when disarming from ‘alarm on’ mode. If the immobiliser sets before the ignition is turned on the remote fob will need to be armed then disarmed to disable the immobiliser. The immobiliser will always disarm using the RK36s touchkeys.

All replacement TVR adapted M36T2 immobilisers will now be sent out with the immobiliser circuits switched to match the TVR wiring, this will now match the higher rated relay to the starter circuit of the TVR, this should cut down on the hot start issue, more info

This is the replacement kit for the M99T2 & M36T2 systems only, for the M99T system click here

  • Two button, anti-scan, anti-grab water resistant and shockproof remotes (2 Button HPA fobs supplied, upgraded to M300 type fobs when purchased with keys))
  • Boot, bonnet and door protection
  • Flashing indicators
  • Diagnostic flashing LED
  • Remote central door locking
  • Ultrasonic (or microwave) sensors (spare ultrasonic sensors supplied - hard top models only) 
  • Battery backup
  • Ignition hotwire protection
  • Thatcham approved

 

Add Key blade into M300 fob for TVR vehicles, choose in the options box above.

Add Keyblade for theTVR

If two key blades are chosen the above kit will be supplied with two M252 keyfobs (instead of 1 M252 & 1 HPA fob), each M252 will be fitted with a YM27 key blank ready for any good autolocksmith to cut.

Specifications HPAT:

  • Two button, anti-scan, anti-grab water resistant and shockproof remotes
  • Boot, bonnet and door protection
  • Flashing indicators
  • Diagnostic flashing LED
  • Remote central door locking
  • Remote window closure (On certain TVR models)
  • Vibration and water resistant system
  • Battery backup siren
  • Ignition hotwire protection
  • Auto Rearm (immobiliser only)
  • Thatcham approved

 Specifications M36T2:

  • Twin circuit immobiliser (cct1 rated at 10A, cct2 25A)
  • Passive arming
  • Touch key operation
  • Rolling code operation
  • Failsafe immobilisation
  • Vibration and water resistant
  • Diagnostic flashing LED
  • Resin bonded construction
  • Covert black coded wiring
  • Low current consumption
  • Immobiliser circuits swapped to match the TVR wiring

Product Code: TVR M99T2 No Boot

 

© Copyright Abacus Car Alarms 2018

eCommerce by CubeCart